Perspex colour reference code:

• Opal White: 040.

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

Perspex colour reference code:

• Opal White: 030.

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 5mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Blue Mirror Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through Blue Mirror Perspex Acrylic sheets meaning they can be used in designs/products to provide areas of solid colour. This is a single sided material – the reverse is grey.

Applications:

Blue Mirror Perspex Acrylic has many applications such as adding a bit of bling to baubles and craft projects!

 

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Colour code: 2424

Tolerances:

The manufacturing tolerance for the thickness of cast acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Red Mirror Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through Red Mirror Perspex Acrylic sheets meaning they can be used in designs/products to provide areas of solid colour. This is a single sided material – the reverse is grey.

Applications:

Red Mirror Perspex Acrylic has many applications such as adding a bit of bling to baubles and craft projects!

 

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Colour code: 1310

Tolerances:

The manufacturing tolerance for the thickness of cast acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Baby Pink Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through baby pink Perspex sheets meaning they can be used in designs/products to provide areas of solid colour.

Applications:

Baby Pink Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Baby Pink: 4522.

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 5mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Red Tint Perspex Acrylic Sheet measures 600mm x 400mm. It is a transparent sheet that you can see through.

Applications:

Red Tint Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Red Tint: 4401

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 6 mm thick Opal White Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through white Perspex sheets meaning they can be used in designs/products to provide areas of solid colour.

Applications:

White Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Opal White: 069.

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 6mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 5mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Highlights Luau Green Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. Translucent, not see-through but will allow light through.

Applications:

Highlights Luau Green Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Highlights Luau green: 6T2H

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Naturals Desert Beige Perspex Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through Naturals Desert Beige Perspex sheets meaning they can be used in designs/products to provide areas of solid colour.

Applications:

Naturals Desert Beige Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Naturals Desert Beige: S2 5268

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 5mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.

This 3mm thick Metallic Matt Gold Acrylic Sheet measures 600mm x 400mm. The surface of the sheets has a high gloss finish. You cannot see through Metallic Matt Gold Perspex sheets meaning they can be used in designs/products to provide areas of solid colour.

Applications:

Metallic Matt Gold Perspex acrylic sheets have many applications such as point of sale, model making, signs, artistic and architectural installation, casings, etc.

Working with Perspex acrylic sheets:

Perspex is a versatile material that can be cut, drilled, laser cut and thermoformed.

Perspex is a thermoplastic which means that when it is heated above 140-180°C it becomes flexible. This allows the material to be formed into the required shape or bent. Once the material cools below 85°C it becomes rigid again.

Perspex sheets are often shaped using a CNC router or laser cutter. The edge of laser cut Perspex has a pleasing polished look. If you look carefully at the edge of a piece of laser cut Perspex you can often see slight vertical lines that are caused by the pulses a laser uses when cutting.

Perspex sheets have a protective film on both faces. If you are etching the material then this should be removed from the surface that is to be etched. If you are just laser cutting then this film can be left in place (if you wish) as it does not create any harmful gases when it is laser cut.

Perspex colour reference code:

• Metallic Matt Gold: MT9918

Dimensions:

• Length: 600mm.
• Width: 400mm.
• Thickness: 3mm (nominal).

Tolerances:

The manufacturing tolerance for the thickness of cast Perspex acrylic sheets are the stated thickness +/-10% plus +/- 0.4mm. This means a 3mm Perspex sheet could be between 2.7mm and 3.3mm in thickness.