4mm medite MDF core with 0.5mm Sapele veneer on each side
High quality A/B grade Sapele Veneered Medite MDF panel measuring 600mm x 400mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.
This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.
As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm
A wood veneer is cut from the log and therefore has its own unique grain, texture, and colour.
A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.
The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs.
The material should be suitable for paint / stain or a lacquered finish.
This product conforms to E1 (low) formaldehyde levels and is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.
- A/B grade Sapele Veneered finish.
- Veneer thickness approximately 0.5mm.
- High quality wood and veneer, for great looking finishes.
- MDF core.
- Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
- Low formaldehyde emissions.
- 1 x 5.0mm Sapele Veneered MDF, 600mm x 400mm Sheet.
- Length: 600mm.
- Width: 400mm.
- Height: 5.0mm.
- Veneer thickness (approximately): 0.5mm.