• Home
  • Shop
  • PatternBoard® MDF Copper 600 x 400mm

PatternBoard® MDF Copper 600 x 400mm

20.09 Ex. VAT

Out of stock


We use water based coverings for all of our PatternBoard® which makes them friendlier for the environment. They are also safer for use with your laser compared to UV inks or Vinyl based coatings.

PatternBoard® comes single sided.

The core of our PatternBoard® is Medite Premier MDF.

These sheets are highly versatile, suitable for cutting and made in Ireland.

As wood is a natural product, there can be a slight bow to the sheet. The natural twist might be in excess of 10mm (see below – Tolerances and Caution).

Medite Premier MDF is produced using superior wood refining technology and specially designed resins. Benefits are consistency of quality and thickness, as well as reduced tool wear. Medite Premier MDF retains the light tan colour of the wood fibre from which it is manufactured.

This product conforms to E1 (low) formaldehyde levels as well as also complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm).

This product is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.




Low formaldehyde emissions.
Highly versatile.
Produced to Forestry Stewardship Council certification.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.


1 x 4mm Laser Compatible Medite Premier MDF, 600mm x 400mm sheet.


Length: 600mm.
Width: 400mm.
Height: 4mm.


The manufacturing tolerance for the thickness of MDF sheets are the stated thickness +/-0.15mm. This means a 4mm MDF sheet could be between 3.85mm and 4.15mm in thickness.

If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.