High quality A/B grade Shs Veneered Medite MDF panel measuring 1200mm x 600mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm

A wood veneer is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs.

The material should be suitable for paint / stain or a lacquered finish.

This product conforms to E1 (low) formaldehyde levels and is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

• A/B grade Ash Veneered finish.
• Veneer thickness approximately 0.5mm.
• High quality wood and veneer, for great looking finishes.
• MDF core.
• Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
• Low formaldehyde emissions.

Contents:

• 1 x 5.0mm Ash Veneered MDF, 1200mm x 600mm Sheet.

Nominal Dimensions:

• Length: 1200mm.
• Width: 600mm.
• Height: 5.0mm.
• Veneer thickness (approximately): 0.5mm.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 5mm Ash Veneer Medite Laser MDF 1200 x 600 mm appeared first on lasermaterials.ie.

High quality A/B grade Cherry Veneered Medite MDF panel measuring 1200mm x 600mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm

A wood veneer is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs.

The material should be suitable for paint / stain or a lacquered finish.

This product conforms to E1 (low) formaldehyde levels and is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

• A/B grade Cherry Veneered finish.
• Veneer thickness approximately 0.5mm.
• High quality wood and veneer, for great looking finishes.
• MDF core.
• Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
• Low formaldehyde emissions.

Contents:

• 1 x 5.0mm Cherry Veneered MDF, 600mm x 400mm Sheet.

Nominal Dimensions:

• Length: 1200mm.
• Width: 600mm.
• Height: 5.0mm.
• Veneer thickness (approximately): 0.5mm.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 5mm Cherry Veneer Medite Laser MDF 1200 x 600 mm appeared first on lasermaterials.ie.

High quality A/B grade Oak Veneered Medite MDF panel measuring 1200mm x 600mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm

A wood veneer is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs.

The material should be suitable for paint / stain or a lacquered finish.

This product conforms to E1 (low) formaldehyde levels and is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

• A/B grade Oak Veneered finish.
• Veneer thickness approximately 0.5mm.
• High quality wood and veneer, for great looking finishes.
• MDF core.
• Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
• Low formaldehyde emissions.

Contents:

• 1 x 5.0mm Oak Veneered MDF, 1200mm x 600mm Sheet.

Nominal Dimensions:

• Length: 1200mm.
• Width: 600mm.
• Height: 5.0mm.
• Veneer thickness (approximately): 0.5mm.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 5mm Oak Veneer Medite Laser MDF 1200 x 600 mm appeared first on lasermaterials.ie.

High quality A/B grade walnut Veneered Medite MDF panel measuring 1200mm x 600mm. Ideal for structural projects requiring a high quality appearance and finish on both the topside and panelling. Suitable for laser cutting.

This MDF panel is veneered on both faces of the sheet: A grade veneer on the front and B grade on the reverse.

Please note:

As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 10mm

A wood veneer is cut from the log and therefore has its own unique grain, texture, and colour.

A Grade Veneer is a very high quality grading (typically the best you will see). The surface of the material will be consistent in appearance with no large variations in colour. Small pin knots are allowed and these would typically be only a few mm in diameter. This grade veneer is on the topside of this MDF sheet.

The B Grade Veneer underside shows the natural look of the veneer. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter (depending on the countries grading rules). The surface should normally be free from open knots and plugs.

The material should be suitable for paint / stain or a lacquered finish.

This product conforms to E1 (low) formaldehyde levels and is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

• A/B grade Walnut Veneered finish.
• Veneer thickness approximately 0.5mm.
• High quality wood and veneer, for great looking finishes.
• MDF core.
• Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.
• Low formaldehyde emissions.

Contents:

• 1 x 5.0mm Walnut Veneered MDF, 1200mm x 600mm Sheet.

Nominal Dimensions:

• Length: 1200mm.
• Width: 600mm.
• Height: 5.0mm.
• Veneer thickness (approximately): 0.5mm.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 5mm Walnut Veneer Medite Laser MDF 1200 x 600 mm appeared first on lasermaterials.ie.

Introducing our 3mm laser-compatible white painted MDF sheets, nominally sized at 1200mm x 600mm. These sheets maintain the same high quality as our standard MDF options but come with a refined white finish on one side, providing an attractive contrast when laser engraved. The engraved areas reveal the natural MDF beneath, creating a striking visual effect.

The reverse side of the sheet retains the classic MDF look, giving you versatile options for your projects. Crafted to EU class E1 standards, our MDF sheets feature low formaldehyde emissions, making them a safer choice for laser cutting applications.

Please note:

As wood is a natural product, there can be a slight bow to the sheet. The natural twist might be in excess of 10mm (see below – Tolerances and Caution).

This product conforms to E1 (low) formaldehyde levels as well as also complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm).

This product is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

Low formaldehyde emissions.
Highly versatile.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.

Contents:

1 x 3mm Laser Compatible Medite MDF, 1200mm x 600mm sheet.

Nominal Dimensions:

Length: 1200mm.
Width: 600mm.
Height: 3mm.

Tolerances:

The manufacturing tolerance for the thickness of MDF sheets are the stated thickness +/-0.2 mm. This means a 3mm MDF sheet could be between 2.8mm and 3.2mm in thickness.

Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

Caution:
If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.

The post 3mm Laserable White Painted MDF, 1200mm x 600mm sheet appeared first on lasermaterials.ie.

Our Laserable Medite MDF sheets are highly versatile, suitable for cutting and made in Ireland.

Please note:

As wood is a natural product, there can be a slight bow to the sheet. The natural twist might be in excess of 10mm (see below – Tolerances and Caution).

Medite MDF is produced using superior wood refining technology and specially designed resins. Benefits are consistency of quality and thickness, as well as reduced tool wear. Finsa Fibranor MDF retains the light tan colour of the wood fibre from which it is manufactured.

This product conforms to E1 (low) formaldehyde levels as well as also complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm).

This product is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

Low formaldehyde emissions.
Highly versatile.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.

Contents:

1 x 3mm Laser Compatible Medite MDF, nominally 1200mm x 600mm sheet.

Nominal Dimensions:

Length: 1200mm.
Width: 600mm.
Height: 3mm.

Tolerances:

The manufacturing tolerance for the thickness of MDF sheets are the stated thickness +/-0.2 mm. This means a 3mm MDF sheet could be between 2.8mm and 3.2mm in thickness.

Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

Caution:
If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.

The post 3mm Laserable Medite MDF, 1200mm x 600mm sheet appeared first on lasermaterials.ie.

Our Laserable Medite Premier MDF sheets are highly versatile, suitable for cutting and made in Ireland.

Please note:

As wood is a natural product, there can be a slight bow to the sheet. The natural twist might be in excess of 10mm (see below – Tolerances and Caution).

Medite Premier MDF is produced using superior wood refining technology and specially designed resins. Benefits are consistency of quality and thickness, as well as reduced tool wear. Medite Premier MDF retains the light tan colour of the wood fibre from which it is manufactured.

This product conforms to E1 (low) formaldehyde levels as well as also complying with the lower levels required by CARB phase 2 (CARB Phase 2 compliant <0.11ppm).

This product is often described as ‘Laser Grade’ MDF but there is no official classification for this. We believe that E1 conforming MDF is the safest and best MDF for using in a laser cutter.

Features:

Low formaldehyde emissions.
Highly versatile.
Produced to Forestry Stewardship Council certification.
Suitable for use in internal dry conditions as defined in EN 622 parts 1 and 5 and conforms to EN13986.

Contents:

1 x 4mm Laser Compatible Medite Premier MDF, nominal 1200mm x 600mm sheet.

Nominal Dimensions:

Length: 1200mm.
Width: 600mm.
Height: 4mm.

Tolerances:

The manufacturing tolerance for the thickness of MDF sheets are the stated thickness +/-0.15mm. This means a 4mm MDF sheet could be between 3.85mm and 4.15mm in thickness.

Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

Caution:
If you are using this product on a laser cutter; these sheets should be strapped/taped to the laser bed before cutting.

The post 4mm Laserable Medite MDF, 1200mm x 600mm sheet appeared first on lasermaterials.ie.

Each panel features:

• Smooth MDF core for stability and zero internal voids

• Bright white finish for clean, professional results

• Clear acrylic coating on both sides to protect the surface, reduce scorch marks, and provide a sealed, ready-to-use finish for UV printing, painting, and marker use

Dry Wipe Compatibility:
The acrylic-coated white surface works perfectly with dry erase markers (whiteboard pens). Marker ink can be wiped clean with a dry or damp cloth, making these panels ideal for reusable signage, menus, and planning boards. Permanent markers are not recommended unless the design is intended to be permanent.

Key Features:

• Thickness: 3mm (1/8″)

• Nominal Dimensions: 1200mm x 600mm

• Ultra-flat for precise cutting and engraving

• Acrylic-coated white finish on both sides

• Minimal warping for reliable, repeatable results

• Ideal for engraving, UV printing, dry erase marker boards, and decorative projects

Applications:
Perfect for reusable whiteboards, menus, event signage, decorative panels, awards, and craft projects where a bright, clean finish is essential.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 3mm TruFlat White Panel 1200mm x 600mm appeared first on lasermaterials.ie.

Each panel features:

• Smooth MDF core for stability and zero internal voids

• Bright white finish for clean, professional results

• Clear acrylic coating on both sides to protect the surface, reduce scorch marks, and provide a sealed, ready-to-use finish for UV printing, painting, and marker use

Dry Wipe Compatibility:
The acrylic-coated white surface works perfectly with dry erase markers (whiteboard pens). Marker ink can be wiped clean with a dry or damp cloth, making these panels ideal for reusable signage, menus, and planning boards. Permanent markers are not recommended unless the design is intended to be permanent.

Key Features:

• Thickness: 3mm (1/8″)

• Nominal Dimensions: 300mm x 400mm

• Ultra-flat for precise cutting and engraving

• Acrylic-coated white finish on both sides

• Minimal warping for reliable, repeatable results

• Ideal for engraving, UV printing, dry erase marker boards, and decorative projects

Applications:
Perfect for reusable whiteboards, menus, event signage, decorative panels, awards, and craft projects where a bright, clean finish is essential.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 3mm TruFlat White Panel 300mm x 400mm appeared first on lasermaterials.ie.

Each panel features:

• Smooth MDF core for stability and zero internal voids

• Bright white finish for clean, professional results

• Clear acrylic coating on both sides to protect the surface, reduce scorch marks, and provide a sealed, ready-to-use finish for UV printing, painting, and marker use

Dry Wipe Compatibility:
The acrylic-coated white surface works perfectly with dry erase markers (whiteboard pens). Marker ink can be wiped clean with a dry or damp cloth, making these panels ideal for reusable signage, menus, and planning boards. Permanent markers are not recommended unless the design is intended to be permanent.

Key Features:

• Thickness: 3mm (1/8″)

• Nominal Dimensions: 600mm x 400mm

• Ultra-flat for precise cutting and engraving

• Acrylic-coated white finish on both sides

• Minimal warping for reliable, repeatable results

• Ideal for engraving, UV printing, dry erase marker boards, and decorative projects

Applications:
Perfect for reusable whiteboards, menus, event signage, decorative panels, awards, and craft projects where a bright, clean finish is essential.

Sheet size tolerance:
Length and width may be supplied slightly oversized to allow for trimming. Minor dimensional variation is normal due to cutting tolerances and imperial-to-metric conversion.

The post 3mm TruFlat White Panel 600mm x 400mm appeared first on lasermaterials.ie.